The main reason why the pressure foot spring replacement of hydraulic shears is dangerous is that the spring pressure is released safely. Disassemble the rubber pad at the bottom of the pressure foot, observe carefully, and then make a device that can extend the spring stretch and loosen it slowly. This principle is also used when replacing and installing new springs.
First unscrew the screw that fixes the presser foot and disassemble the presser foot, then take out the piston to replace the sealing ring. The sealing ring can be installed in two ways, one is to install on the piston, and the other is to install on the body of the presser foot. , Please refer to how to connect the foot switch of the guillotine shears
The performance characteristics of hydraulic shears
1. The rectangular lower blade of the hydraulic shearing machine can use four cutting edges to cut, which extends the service life of the blade.
2. There is an auxiliary knife seat on the working table of the hydraulic shearing machine, which is convenient for micro-adjustment of the blade.
3. Hydraulic shears QC12Y hydraulic digital display pendulum shears, hydraulic shears, new R&F brand shears, steel plate welded plate forming machines are equipped with feeding balls on the work surface, which is easy to operate.
4. The blade gap adjustment of hydraulic shears adopts an adjustment mechanism to meet the cutting needs of different plate thicknesses and materials.
5. The hydraulic shearing machine can adjust the shearing stroke, which can not only improve the processing efficiency, but also realize the function of segmented shearing. Hydraulic Shearing Machine/Shearing Machine Price
6. Hydraulic shearing machine. The number of shearing times is automatically counted, which reduces the tedious work of counting.
Hydraulic shear hydraulic system
1. The advanced integrated hydraulic system reduces pipeline installation and ensures a high degree of reliability and safety in the operation of the machine tool.
2. Material pressing mechanism: After the oil is supplied from several material pressing oil cylinders installed on the front support plate of the frame, the shearing machine manufacturer will press the material pressing head down after overcoming the tension of the tension spring.
