The advantage of the shearing machine manufacturer is to meet the compact display of the polished parts and the limited space when the manual clamping is used. Hydraulic clamping can easily solve these problems through the operation of the reversing valve, which can realize the simultaneous clamping and polishing of multiple parts on a clamping body. The hydraulic joint fixture can realize multi-station clamping, which greatly mobilizes the work production rate. The price of shearing machine is nowadays when rigid paring or polishing thin-walled parts are set up for the shearing machine, the auxiliary floating parrying cylinder is the choice. The joint of the cornering cylinder and the floating parrying cylinder can ensure that the clamped parts are not deformed.
The soft starter inside the shearing machine
1. Check the main circuit and control circuit of the soft starter carefully to see if there is any wiring error.
2. Set the switch on the front panel of the soft starter to select the motor connection mode to the motor position.
3. According to the product manual, set the start ramp time knob on the front panel of the soft starter according to the basic parameters of different applications.
4. After the main circuit is powered on, the main motor starts. In order to obtain the starting parameters, the test can be repeated. Shanghai Essier Trade Center
When the coiling machine of the shearing machine is winding the strip steel, the bending machine manufacturer must have a certain coiling tension of the shearing machine. The coiling tension value of the shearing machine depends on the working status of the coiling machine of the shearing machine and product specifications. Inappropriate tension values will directly affect product quality. The coiling tension value of the shearing machine that is too large will affect the internal metallographic structure of the product and increase the capacity of the equipment motor; on the contrary, the coiling tension value of the shearing machine that is too small will also affect the product quality and the occurrence of strip running. Partial. It can be seen that if the coiling tension value of the shearing machine is too large or too small, it will directly affect the normal operation of the coiling machine of the shearing machine.
