When using the shears, we all need to change the oil of the equipment, so that in the later use, the efficiency can be improved and the wear of the equipment can be reduced. Let's look at the oil change method.
First, for parts that use high-viscosity lubricating oil, if you change the oil to low-viscosity lubricating oil at will, it will affect the sealing performance of the corresponding box and shaft hole to a certain extent, and sometimes greatly reduce the sealing performance of these parts. .
Secondly, if the oil tank is not cleaned when changing the oil, the dirt in the oil tank may enter the lubrication system, block the oil circuit, wear the seals and cause oil leakage.
Third, the oil is added too much when changing the oil, especially in the parts with rotating parts, because of the stirring effect of the rotating parts, oil spills are more likely to occur.
As for the method of changing the oil of the shearing machine, after we understand, we will regularly change the oil of the equipment to ensure that the equipment operates well and reduces damage.
