The guillotine shearing machine adopts the frame layout and adopts all-steel welding; four corners and octagonal right-angle guide rails, high precision, good rigidity, and adopts hydraulic preloading. The hydraulic system adopts two-way cartridge integrated valve;
The whole system adopts "PLC" programmable pace controller; and can be equipped with stroke digital display, photoelectric shielding device and mobile working table (for changing the mold). The guillotine shear has the double-action result of the upper slide and the lower hydraulic cushion. The working pressure stroke can be adjusted according to the process requirements within the delineated scope, and the operation is light and the button is used for rendezvous control. It has three operation essentials: mediation, manual and semi-automatic.
Gate Shearing Machine Tension Use: Tension is used for stretching, punching, bending, flanging and other processes. Used in industries such as automobiles, tractors, rolling stock, ships, motors, and meters, as well as in the power industry and aerospace industries such as metal sheet stretching, bending, extrusion, forming and other processes. It is also practical to deal with the stretching of various high-strength alloy plates.
The characteristics of gate shears
The essentials of shearing machine maintenance: operate strictly in accordance with the operating procedures. Add lubricating oil according to the requirements of the lubrication chart every time before starting the machine. The oil should be clean and free of precipitation.
The machine tool must always be connected to clean, unpainted parts with anti-rust grease. The lubricating oil in the motor bearing should be changed regularly and more frequently, and the electrical department should be checked for normal, quiet and reliable work.
Regularly check whether the V-belt, handles, knobs, buttons are damaged, and the ones that are severely worn should be changed in time, and the spare parts should be reported for supplementation. Regularly check the patch switches, insurances, handles, and ensure that they are reliable.
10 minutes before the end of get off work every day, lubricate the shearing machine and clean the machine. It is strictly forbidden for non-designated personnel to operate this configuration, and usually must be stopped by people.
