Now whether it is selling hydraulic shears or other machine tools, the brand value of the machine tool is greater than its own price. This is one of the truths that everyone knows. Our hydraulic shears are the vane of the entire machine tool industry, whether it is the quality of the machine tool or the processing performance, so more and more users rely on us, praise us, and become friendly partners with us. With the continuous reform and improvement of the company's production technology, our technicians are gradually improving the product performance requirements, and strive to make the hydraulic shearing machine so that every user can use it with peace of mind.
1. The shearing machine should be used and kept by a dedicated person. The operator must be familiar with the structure and performance of the machine tool.
2. It is strictly forbidden to use the shearing machine with overload. Do not cut hardened steel and hard steel, high-speed steel, alloy steel, castings and non-metallic materials.
3. The cutting edge of the blade should be kept sharp, and the cutting edge should be blunt or damaged. It should be sharpened or replaced in time.
4. When multi-person operation, there should be a special person to command, and cooperation should be coordinated.
5. It is forbidden to cut two materials of different specifications at the same time on the shearing machine, and overlap cutting is not allowed.
6. It is forbidden to use the handle to facilitate the operation under the pressure plate when cutting the board and feeding. When cutting the material, use an iron plate to hold it down, and keep your fingers away from the knife edge at least 200 mm when cutting the material.
7. After aligning with the pry, the pry should be pulled out immediately before cutting. If the iron plate moves, use a wooden pillow to secure it to prevent the prying from popping out and hurting people after the presser foot comes down.
8. The cut workpieces must be placed steadily, not too high, and not allowed to be stacked on the aisle. Remaining materials and waste materials should be cleaned up in time to keep the site clean and tidy.
What effect can hydraulic shears achieve by using hydraulic pressure? If we want to achieve any effect but do not achieve it, we can directly put forward our ideas with the shears manufacturer, and believe that the shears manufacturer will adjust it in time.
