Perhaps those who have used shears manufacturers should know that the trims of shears are roughly divided into front bezels, rear bezels and corner bezels. However, adjusting these baffles has become a headache for many users. Question, in view of this situation, I will tell you how to adjust these baffles.
Regarding the content of this part, the relevant personnel of Shiqiang shears think so, as follows:
1. Adjustment of the front baffle
First put the rear baffle close to the lower knife edge, and then close the template to the rear baffle. The shearing machine manufacturer then closes the front baffle to the template and fixes it, then loosen the rear baffle, remove the template, and install the plate. Material, cut;
2. Adjustment of the rear baffle
First, the template should be leveled with the lower knife edge, and then the back baffle should be close to the template and fixed, remove the template, and then install the sheet for cutting;
Recommended reading: Analyze the advantages and disadvantages of mechanical symmetrical bending machine
3. Adjustment of the adjustment angle baffle
The adjustment of the angle baffle is like this. First put the template on the table and align the lower knife edge. The price of the shearing machine is adjusted and fixed. Then the rear baffle is adjusted according to the template. The angle baffle and the Rear baffle for positioning.
