Many shearing machine users rely on important standard components and options that can increase productivity to increase productivity. Increased productivity can take many forms: saving manpower, improving material flow, increasing accuracy, improving cutting quality and avoiding auxiliary operations, but The important thing is to enhance security.
Positive stop arm: used for trimming and straightening. According to the configuration, it can also be used as a front stop and support longer plates.
Support arm: supports the material in front of the shearing machine, and can be used with a suitable front baffle to measure the cut parts.
Limit block: There are different types, such as the rotary limit block suitable for aligning the stop arm and the support arm. These limit blocks are used for front gauges. Generally, the lifting limit block is more widely used in the front support arm, which enables the shearing machine to transport the sheet from the top of the limit block: when the sheet is to be fed from the limit block, the limit block is hidden and connected with The workbench is flush; after the sheet passes, the limit block bounces up.
Programmable back gauge: the size of the back gauge can be set, and it may be able to control other accessories, because it is a programmable device.
Sheet support device: This device (some include the front support arm or the front alignment stop arm) is generally located behind the blade, so that the material can withstand the back stopper and support the material to prevent the material from sagging and ensure The correct incision position. When using the plate support device to support the material, the operation sequence is as follows: step on the pedal, the presser drops and compresses the material, the front support device moves to the unaffected cutting position, and the material is cut. After this cycle is completed, the whole process returns to the neutral position, so that the next cut can be performed.
Manual or electric machine front operation back gauge: used to adjust the size of the back gauge to control the blanking specification behind the blade.
Provide different materials for the life of large blades: According to the different materials to be cut, blades of different materials can be provided. The goal is to provide blades and long blade life for the money invested by users.
Manual knife edge gap adjuster: The knife edge gap adjuster can adjust the shearing machine to the knife edge gap suitable for the thickness, brand and size of the material to be cut. This adjustment is made from the side of the machine. On some models, it must be carried out from the frame at each end, which increases the possibility of errors caused by inconsistent adjustments at both ends.
Knife-edge gap electric adjuster: use a motor to adjust the knife-edge gap. This kind of regulator can often be controlled by the computer controller on the shearing machine. For this purpose, the material thickness, type and cutting length parameters are input into the controller.
Ball guide rail transfer device: These accessories are installed on the worktable of the shearing machine to facilitate the movement of sheet materials (especially thicker materials).
Conveyor belt/palletizer/waste separator: the conveying/palletizing mechanism is attached to the back of the shearing machine. The conveyor belt feeds the material into the palletizer, and in some cases, it can also send the sheared sheet back to the shearing machine for the next cutting. The waste separator is attached to the palletizing/conveying device to separate the cut corner waste from the used materials. /*468x60 created on 11-3-30*/
Machine front return device: This conveyor belt device returns the material to the front of the shearing machine through the blade area, so it can be cut sequentially from this piece of material.
Manual centralized lubrication system: The manual centralized lubrication system refuels multiple lubrication points at a certain position.
Automatic lubrication system: automatically provide a systematic and appropriate amount of lubricating oil for the lubrication point.
Beam/Cut Line: This line provides convenience for cutting materials on the scribing line. The operator scribes a line on the sheet, and the shadow line projected by the beam enables the operator to align the scribe line and the edge of the blade to obtain a more accurate cut.
