When the shearing machine is in use, we need to understand its safety operating procedures, so that we can perform correct operations in accordance with the instructions when we use it later.
1. Wear tight-fitting protective clothing before operation. Cuffs should be fastened. The hem of the jacket cannot be opened. It is not allowed to wear, take off, or wrap around the body by the machine to prevent the machine from being twisted. You must wear a safety helmet, braids should be put in the hat, and no skirts or slippers are allowed.
2. The shearing machine operator must be familiar with the main structure, performance and use of the shearing machine.
3. Shearing machine [1] is suitable for cutting various steel plates, copper plates, aluminum plates and non-metallic material plates whose material thickness is the rated value of the machine tool, and it must be a material free of hard marks, welding slag, slag inclusion, and welding seam. Excessive thickness is not allowed.
4. How to use the shearing machine:
A. Adjust the blade gap according to the thickness of the material to be cut.
B. Adjust the profiling or fixture according to the width of the material to be cut.
C. Before the shearing machine is operated, make 1-3 empty strokes, and the shearing work can be carried out after it is normal.
5. If the machine is found to be operating abnormally during use, immediately cut off the power supply and shut down for inspection. Imported pump
6. When adjusting the machine tool, the power supply must be cut off. When moving the workpiece, pay attention to the safety of your hands.
7. All parts of the shearing machine should be kept lubricated frequently. The operator should fill the lubricating oil once per shift, and the mechanics should fill the rolling bearing part with lubricating oil once every six months.
The correct operation of the shearing machine can not only reduce the generation of waste, but also will not cause danger to the operator itself, and do a good job of safety protection.
